Design of Triangular waveform generator

Design of Triangular waveform generator

 Design:

                    f= 1kHz

                  T=1mS

                Vcc= 10V          

                   Vo p-p= 2 (R2/ R1)* Vsat

                   R2= 1k ohm

                     R1=1.16k ohm

                    T= 4(R2/R1)RC

                 =>RC= 4.5*10-3/4

                Taking C= 0.1u F

                     R=11.25k

Circuit :

Waveform:

Procedure :

 1. The circuit was connected as shown in figure.

 

 2. The required analysis settings is provided and the simulation was done to obtain the output waveforms

 3. The results are obtained from waveforms

RESULT

       Frequency : 1khz   , Vo=4v

Conclusion :

                   

       Triangular waveform generator is designed and verified

Note : I used circuit maker software for this.